F 450 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Electronic Brake Control Module: Service and Repair
Vehicles Built From 11/30/00
Removal and Installation
1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
Disconnect the battery ground cable.
2. Disconnect the anti-lock brake control module electrical connector.
3. Disconnect the pump motor electrical connector from the anti-lock brake control module.
4. Remove the screws and the anti-lock brake control module.
5. To install, reverse the removal procedure.