F 450 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
7. Disconnect the pressure cut-off switch electrical connector.
8. Remove the RH front fender splash shield.
9. Loosen the A/C manifold and tube bolt and remove the manifold and tube assembly.
10. Remove the pressure cut-off switch.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.