F 450 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Wheel Hub: Service and Repair
Front
WHEEL HUB
Removal
All Vehicles
1. Remove the front brake disc.
2. Remove the hub lock.
1. Remove the retainer ring.
2. Pull outward and remove the hub lock.
3. Remove the axle shaft thrust washers.
1. Remove the snap ring.
2. Remove the three thrust washers.
Vehicles equipped with ABS
4. CAUTION: Do not remove the ABS sensor from the bearing.
Disconnect the ABS wheel sensor harness.
1. Disconnect the connector.
2. Disconnect the harness routing clips.
All vehicles
5. NOTE: The wheel hub and bearing is a slip fit design and should not require a puller to remove it.