F 450 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Starter Motor: Service and Repair
REMOVAL
WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM, BE AWARE THAT HEAVY GAUGE LEADS ARE
CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE PROTECTIVE CAPS ARE IN PLACE WHEN MAINTENANCE IS
COMPLETE.
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Remove the starter motor solenoid terminal cover.
4. Disconnect the starter motor electrical connections.
1
Remove the nuts (B+ and S).
2
Remove the battery cable.
3
Remove the starter solenoid wire.
5. Remove the starter motor ground cable nut and the starter motor ground cable.
