F 450 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
5. NOTE: The word UP stamped on the separator plate reinforcement, must be visible when installed.
Install the separator plate reinforcement plate.
1
Position the separator plate reinforcement plate.
2
Install the bolts.
6. Install the solenoid screen assembly by pushing it in and rotating it to lock.
7. NOTE: Prior to installing the solenoid body assembly, coat the case connector bore with silicone grease.
Install the solenoid body assembly.
1
Install the solenoid body assembly.
2
Install the nut.
3
Install the bolts and nut finger-tight.