F 450 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
2. Remove the disc brake calipers, please refer to Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/ See: Brakes
and Traction Control/Disc Brake System/Brake Caliper/Service and Repair
1
Remove the bolts.
2
Lift the disc brake caliper from the disc brake caliper anchor plate.
^
Using mechanics wire, position the disc brake caliper aside.
3. Remove the disc brake pads.
1
Remove the disc brake pads.
2
Remove the front disc brake caliper anchor rail clips.
4. Disconnect the power vacuum hub hose from the knuckle, then disconnect the ABS sensor.
5. Remove the front stabilizer bar-to-axle retaining bolts.
6. If equipped, disconnect the steering damper at the axle.
