F 450 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
2. Remove the ring gear bolts.
3. NOTE: The anti-lock speed sensor ring cannot be reused once removed.
Insert a punch in the bolt holes and drive the ring gear off.
^
If necessary, remove the anti-lock speed sensor ring and discard it.
4. If the differential bearings require removal, refer to Differential Case.
5. NOTE: This tool does not have the 1/2-inch drive hole.
^
Position the Traction-Lok Torque Tool Set in a vise.
6. Position the differential case on the Traction-Lok Torque Tool Set.