F 450 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
13. Position the right differential case half with the index marks aligned.
14. Install the retaining bolts and tighten.
15. Check the torque required to rotate one differential side gear.
^
Install the Traction-Lok Torque Tool Set with the 1/2-inch drive hole as shown.
^
The initial break-away torque, if the original clutch plates are used, must be within specification. The rotating torque required to keep the
differential side gear turning with new clutch plates may vary.
