F 550 2WD Super Duty V10-6.8L (2009)
Antenna Cable: Service and Repair
Antenna Cable - AM/FM
Antenna Cable - AM/FM
Removal and Installation
1. Remove the RH A-pillar lower trim panel.
2. Disconnect the antenna cable electrical connector.
3. Remove the Audio Control Module (ACM). For additional information, refer to Audio Control Module (ACM) See: Cellular
Phone/Communications Control Module/Service and Repair/Removal and Replacement/Audio Control Module (ACM).
4. NOTE: Lower the glove compartment completely to access the retaining pins.
Remove the antenna cable.
-
Release the retaining pins.
5. To install, reverse the removal procedure.