F 550 2WD Super Duty V10-6.8L (2009)
8. Tighten the nuts and bolts retaining the gusset to the transmission support crossmember.
-
Tighten to 90 Nm (66 lb-ft).
9. Install new transmission support insulator nuts.
-
For manual transmissions, tighten to 115 Nm (85 lb-ft).
-
For automatic transmissions, tighten to 103 Nm (76 lb-ft).
10. Remove the support from the transmission.
11. Connect the electrical connection to the transmission support crossmember.