F 550 2WD Super Duty V10-6.8L (2009)
5. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or the cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1. Position the shoulder safety belt guide cover upward.
2. Remove the shoulder safety belt guide bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
3. Remove the shoulder safety belt guide.
6. Remove the safety belt anchor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
7. Remove the B-pillar trim panel.
-
Route the front safety belt and the shoulder belt guide through the B-pillar trim panel.