F 550 2WD Super Duty V10-6.8L (2009)
Utility Storage Compartment: Service and Repair
Storage Compartment - Rear Seat
Storage Compartment - Rear Seat
Storage Compartment - Rear seat
Removal and Installation
NOTE: The rear seat storage compartment lock, latches and floor foam are serviceable.
1. Lift the rear lower seat.
2. Open the rear seat storage compartment and remove the floor foam.
3. Remove the 4 rear seat storage compartment bolts.
-
To install, tighten to 25 Nm (18 lb-ft).
4. Remove the rear seat storage compartment.
5. To install, reverse the removal procedure.