F 550 2WD Super Duty V10-6.8L (2009)
Disassembly and Assembly
1. Remove the seat backrest. For additional information, refer to Seat Backrest - Front, 20 Percent See: Seat Back/Service and Repair/Removal and
Replacement/Front Seats/Seat Backrest - Front, 20 Percent.
2. Remove the backrest bracket-to-LH riser bolts.
-
To install, tighten to 50 Nm (37 lb-ft).
3. Remove the backrest bracket-to-cushion frame bolt.
-
Remove the backrest bracket.
-
To install, tighten to 50 Nm (37 lb-ft).
4. Remove the riser-to-cushion frame bolts.
-
Remove the LH and RH riser.
-
To install, tighten to 50 Nm (37 lb-ft).
5. Remove the seat latch. For additional information, refer to Seat Latch - 20 Percent See: Seat Latch/Service and Repair/Seat Latch - 20 Percent.
6. Unfasten the cushion trim cover J-clips. Remove the cushion trim cover and cushion foam pad.
-
If necessary, remove the cushion trim cover from the cushion foam pad.