F 550 2WD Super Duty V10-6.8L (2009)
20. Connect the RH hood safety latch cable and 3 position retainers.
21. Position the horn assembly bracket and install the bolt.
-
Tighten to 11 Nm (97 lb-in).
22. Connect the horn assembly electrical connector.
23. Connect the LH hood latch cable and 2 position retainers.
24. If equipped, connect the hood switch pushpin retainer and electrical connector.
25. Install the ACL outlet pipe.
26. Fill and bleed the cooling system.
27. Evacuate, leak test and charge the refrigerant system.
