F 550 2WD Super Duty V10-6.8L (2009)
1. For additional information, refer to the procedures.
Camshaft - LH
Camshaft - LH
Removal
NOTICE: The camshaft procedure must be followed exactly or damage to the valves and pistons will result.
1. Position the crankshaft damper spoke at the 12 o'clock position and the timing mark indentation at the 1 o'clock position.
2. Remove the LH valve cover. For additional information, refer to Valve Cover - LH See: Cylinder Head Assembly/Valve Cover/Service and
Repair/Valve Cover - LH.
3. NOTICE: The balance shaft bearing caps must be installed in their original locations or engine damage may occur. Record camshaft
bearing cap locations.
Remove the 6 bolts in the sequence shown, the 3 bearing caps and the balance shaft.