F 550 2WD Super Duty V10-6.8L (2009)
Idler Pulley: Service and Repair
Accessory Drive Belt Idler Pulley
Accessory Drive Belt Idler Pulley - Gasoline Engines
Removal and Installation
1. Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt.
2. Remove the bolt and the accessory drive belt idler pulley.
-
To install, tighten to 25 Nm (18 lb-ft).
3. Repeat the previous step for each accessory drive belt idler pulley being serviced.
4. To install, reverse the removal procedure.
