F 550 2WD Super Duty V10-6.8L (2009)
16. Install the upper ball joint nut and a new cotter pin.
-
Tighten to 94 Nm (69 lb-ft).
17. Tighten the lower ball joint nut to 204 Nm (150 lb-ft).
18. Verify the camber and caster settings, adjust as necessary.
-
Once the optimal caster/camber has been achieved, check the total toe and adjust as necessary. For additional information, refer to Toe
Adjustment - F-250 and F-350 Four Wheel Drive (4WD), F-450, F-550 See: Toe Adjustment.