F 550 2WD Super Duty V10-6.8L (2009)
Maintenance Required Lamp/Indicator: Procedures
Message Center Configuration
Oil Life Reset Message Center Cluster
1. Press and release the SETUP button until the message center displays OIL LIFE XXX% HOLD RESET = NEW OIL.
2. Press and hold the RESET button for 2 seconds and release when the message center displays OIL LIFE SET TO XXX%.
3. Press and release the SETUP button to exit the procedure.
Oil Life Reset Base Instrument Cluster (IC)
NOTE: All message center functions are carried out using the single stem SELECT/RESET button in the Instrument Cluster (IC).
1. Press and release the SELECT/RESET button to scroll through the information displays until the message center displays HOLD RESET FOR
SETUP MENU.
2. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE XXX% HOLD RESET = NEW.
3. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE SET TO XXX%.
4. Release the SELECT/RESET button and allow the setup timer to expire to exit the procedure.
Oil Life Start Value Message Center Cluster
1. Press and release the SETUP button until the message center displays OIL LIFE XXX% HOLD RESET = NEW OIL.
2. Press and hold the RESET button for 2 seconds and release when the message center displays OIL LIFE SET TO XXX%.
3. Press and release the RESET button to decrease the oil life start value (from 100% to 10%) for each 10% reduction until the desired oil life start value
is displayed.
4. Press and release the SETUP button to exit the procedure.
Oil Life Start Value Base Instrument Cluster (IC)
NOTE: All message center functions are carried out using the single stem SELECT/RESET button in the Instrument Cluster (IC).
1. Press and release the SELECT/RESET button to scroll through the information displays until the message center displays HOLD RESET FOR
SETUP MENU.
2. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE XXX% HOLD RESET = NEW.
3. Press and hold the SELECT/RESET button for approximately 2 seconds until the message center displays OIL LIFE SET TO XXX%.
4. NOTE: The oil life start value reduces by 10% for each second that the SELECT/RESET button is held once the oil life start value begins decreasing.
Continue to hold the SELECT/RESET button until the oil life begins to decrease in value (from 100% down to 10%), continuing to hold until the desired
start value is displayed.
5. Release the SELECT/RESET button and allow the setup timer to expire to exit the procedure.
