ford Workshop Repair Guides

Ford F 550 Super Duty V10-68L Workshop Service and Repair Manuals

Fuel Tank Pressure Sensor|Page 2924 > < Fuel Tank Pressure Sensor
Page 2
background image

3. Disconnect the FTP sensor electrical connector.

4. Disconnect the fuel vapor tubes from the FTP sensor.

5. Remove the FTP sensor.

Aft-of-axle and auxiliary fuel tank equipped vehicles

6. NOTICE: The Fuel Tank Pressure (FTP) sensor must be disengaged from the fuel tank before it can be removed. Push down while

rotating the FTP sensor counterclockwise to disengage it from the fuel tank. Failure to do so can cause damage to the FTP sensor or the
fuel tank.

Press down and rotate the FTP sensor counterclockwise and remove it from the fuel tank.

All vehicles

7. To install, reverse the removal procedure.

-

Carry out the Evaporative Emission System Leak Test. For additional information, refer to Evaporative Emission System Leak Test  See:
Emission Control Systems/Evaporative Emissions System/Testing and Inspection.

Fuel Tank Pressure Sensor|Page 2924 > < Fuel Tank Pressure Sensor