F 550 2WD Super Duty V10-6.8L (2009)
Variable Induction Control Actuator: Service and Repair
Intake Manifold Runner Control (IMRC) Actuator - 6.8L
Removal and Installation
1. Remove the air cleaner outlet pipe.
2. Disconnect the Intake Manifold Runner Control (IMRC) actuator electrical connector.
3. Remove the 3 bolts.
-
To install, tighten to 6 Nm (53 lb-in).
4. Disconnect the IMRC rod pivot pin from the intake manifold rod and remove the IMRC.
-
Lubricate the IMRC rod pivot pin with clean engine oil prior to installation.
5. To install, reverse the removal procedure.