F 550 2WD Super Duty V10-6.8L (2009)
Variable Induction Position Sensor: Description and Operation
Electronic Engine Controls
Intake Manifold Runner Control (IMRC) Sensor (6.8L 3V)
The 6.8L air induction system improves engine performance by using the IMRC as follows:
-
The intake manifold has 2 runners per cylinder, feeding each of the intake ports in the cylinder heads.
-
The IMRC assemblies are located between the upper intake manifold and cylinder heads, providing 2 air passages for each cylinder.
-
The valve plates are opened and closed by the IMRC electric actuator, which is controlled by PCM.
-
One air passage is always open and the other passage switches from closed to open by means of a valve plate.
-
Below 1,500 rpm, this valve plate is closed to improve fuel economy and emissions.
For removal and installation, refer to Intake Manifold Runner Control (IMRC) Actuator - 6.8L See: Powertrain Management/Fuel Delivery and Air
Induction/Variable Induction System/Variable Induction Control Actuator/Service and Repair.