F 550 2WD Super Duty V10-6.8L (2009)
Early build vehicles
5. Remove and discard the stabilizer bar link lower bolt.
-
To install, tighten the new bolt to 150 Nm (111 lb-ft).
Late build vehicles
6. Remove and discard the stabilizer bar link upper nut.
-
To install, tighten the new nut to 80 Nm (59 lb-ft).
All vehicles
7. Lower the axle and remove the spring.
8. NOTE: Inspect the spring upper and lower seats, install new as necessary.
To install, reverse the removal procedure.
