F 550 2WD Super Duty V10-6.8L (2009)
Wheel Bearing: Service and Repair
Front Suspension
Wheel Bearing and Wheel Hub - F-450, F-550
NOTE: RH shown, LH similar.
Removal and Installation
1. Remove the wheel and tire.
2. Disconnect the wheel speed sensor electrical connector.
3. Remove the wheel speed sensor harness-to-radius arm bolt.
-
To install, tighten to 15 Nm (133 lb-in).
4. Remove the 2 wheel speed sensor harness-to-axle bolts.
-
To install, tighten to 15 Nm (133 lb-in).