F 550 2WD Super Duty V10-6.8L (2009)
Front Door Window Regulator: Service and Repair
Window Regulator - Front Door
Window Regulator - Front Door
Removal
1. Remove the window regulator motor. For additional information, refer to Window Regulator Motor - Front Door See: Power Window
Motor/Front Door Window Motor/Service and Repair/Window Regulator Motor - Front Door.
Installation
1. With the regulator assembly in the full UP position, position the window regulator motor on the new regulator assembly and install the motor
bolts.
-
Tighten to 13 Nm (115 lb-in).
2. Position the counterbalance spring on the regulator assembly as shown.
3. Install the locking tab of the counterbalance spring into the regulator assembly.
-
Make sure the counterbalance spring is firmly seated into the regulator assembly.
4. Install the regulator and motor assembly. For additional information, refer to Window Regulator and Motor - Front Door See: Window Regulator
and Motor - Front Door.