F 550 2WD Super Duty V10-6.8L VIN S (2000)
Wheel Speed Sensor: Service and Repair
Four Wheel Antilock Brake System (4WABS)
Sensor, Front
Removal
1. Disconnect the battery ground cable.
2. Disconnect the front anti-lock brake sensor electrical connector.
1
Disconnect the electrical connector.
2
Detach the front anti-lock brake sensor wire harness from the brake hose.
3. Remove the front anti-lock brake sensor.
1
Remove the bolts.
2
Remove the front anti-lock brake sensor.
Installation
1. Note: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mile) or more to relearn the strategy.
To install, reverse the removal procedure.
Sensor, Rear
Removal