F 550 2WD Super Duty V10-6.8L VIN S (2000)
3. Install the front auxiliary evaporator outlet line through the wheel well and connect the evaporator outlet line.
NOTE: Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or
equivalent meeting Ford specification WSH-M1C231-B.
4. Snap the front auxiliary evaporator outlet line into the brackets.
5. Install the brackets over the studs and loosely install the nuts.
6. Connect the two auxiliary evaporator outlet lines.
CAUTION: Use a wrench on each side of the fitting to prevent damage to the A/C fitting.
NOTE: Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
