F 550 2WD Super Duty V10-6.8L VIN S (2000)
Crankshaft Position Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the A/C compressor. For additional information, refer to Heating and Air Conditioning.
3. Raise and support the vehicle. For additional information, refer to Maintenance/Service and Repair.
4. Disconnect the crankshaft position (CKP) sensor electrical connector.
5. Remove the bolt and the CKP sensor.
NOTE: The crankshaft pulley is removed for clarity.
INSTALLATION
1. To install, reverse the removal procedure.
