F 550 2WD Super Duty V10-6.8L VIN S (2000)
Hazard Warning Switch: Service and Repair
MULTIFUNCTION SWITCH
Removal and Installation
1. Remove the ignition switch lock cylinder.
1
Insert the ignition key into the lock cylinder and turn to the RUN position.
2
Push the ignition switch lock cylinder release tab with a punch while pulling out the ignition switch lock cylinder.
2. If equipped, twist the tilt wheel handle and shank and remove.
3. Remove the upper and lower steering column shrouds.
1
Remove the screws.
2
Remove the upper and lower steering column shrouds.
