F 550 2WD Super Duty V10-6.8L VIN S (2000)
5. Disconnect the starter motor solenoid relay switch wires and cables.
1. Remove insulator caps.
2. Disconnect the starter control feed.
3. Remove the nuts.
4. Remove the cables.
6. Remove the starter motor solenoid relay switch.
1. Remove the bolts.
2. Remove the starter motor solenoid relay switch.
Installation
1. WARNING: When carrying out maintenance on the starting system be aware that heavy gauge leads are connected directly to the
battery. Make sure protective caps are in place when maintenance is complete.
To install, reverse the removal procedure.