F 550 2WD Super Duty V10-6.8L VIN S (2000)
Front Steering Knuckle: Service and Repair
Special Tool(s)
Special Service Tool(s)
Removal
1. CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in
major service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a
replacement part of lesser quality or substitute design. Torque values must be used as specified during re-assembly to ensure proper retention of
these parts.
Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the disc brake caliper and the front disc brake hub and rotor.
4. Remove the front disc brake rotor shield.
5. If equipped, remove the ABS sensor retaining bolt, ABS sensor harness retaining boll and the ABS sensor. Position out of the way.
