F 550 2WD Super Duty V10-6.8L VIN S (2000)
6. Install the outer bearing cone and roller assembly and the flat washer on the spindle and install the adjusting nut. Install a new cotter pin.
7. Install the hub cap.
8. Install the front disc brake caliper and rotor.
9. Install the front wheel and tire assemblies.
10. Lower the vehicle.
Wheel Hub and Bearing - Motorhome
Wheel Hub and Bearing - Motorhome
Removal
1. Raise and support the vehicle.
2. Remove the front wheel and tire assemblies.
3. Remove the front disc brake caliper and position out of the way.