F 550 2WD Super Duty V10-6.8L VIN S (2000)
Slip Yoke: Service and Repair
Special Tools
Disassembly
1. CAUTION: Do not clamp the driveshaft in the jaws of a vice or a similar holding fixture.
Place the driveshaft onto a suitable workbench.
2. Index mark the driveshaft slip yoke to the stub shaft.
3. Remove the driveshaft slip yoke.
1. Cut and discard the driveshaft slip yoke boot clamps.
2. Separate the driveshaft slip yoke from the stub shaft.
