F 550 2WD Super Duty V10-6.8L VIN S (2000)
6. Remove and discard the output oil seal.
Installation
Vehicles with 4-wheel drive
1. Using the special tool, install a new output oil seal.
^
Coat the outer diameter of the new seal with Gasket and Trim Adhesive F3AZ-19B508-AA or equivalent.
2. Install the transfer case.
Vehicles with 2-wheel drive
3. Using the special tool, install a new output oil seal.
^
Coat the outer diameter of the new seal with Gasket and Trim Adhesive F3AZ-1913508-AA or equivalent.
4. Using the special tools, install the pinion flange.
^
Apply Threadlock 262E2FZ-19554-B or equivalent meeting Ford specifications WSK-M2G351-A6 to the threads of the pinion flange locknut.
All vehicles
