F 550 2WD Super Duty V10-6.8L VIN V (2005)
7. Route the front safety belt and the shoulder belt guide through the rear corner trim panel.
8. Remove the rear corner trim panel from the vehicle.
9. To install, reverse the removal procedure.
Trim Panel - Rear Corner, SuperCab
TRIM PANEL - REAR CORNER, SUPERCAB
Torx Bit, Safety Belt Bolt
Special Tool(s)
Removal and Installation
1. Remove the rear seat.
2. Pull the rear door opening weatherstrips away from the rear corner trim panel.
3. Remove the scuff plate.
