F 550 2WD Super Duty V10-6.8L VIN V (2005)
3. Remove the two screws securing the lumbar adjuster control to the seat track riser.
-
Push the lumbar adjuster control inward to provide clearance for the trim panel removal.
4. Pull the rearward lower corner of the side shield to disengage the metal retaining clip.
5. CAUTION: Bend the side shield slightly to make sure the shield is not scratched by the recliner lever.
Remove the side trim cover.
Heated seats
6. Disconnect the heated seat switch electrical connector.
7. Disconnect the heated seat element electrical connectors. Release the electrical connectors from their cushion pan attachments.
Power seats
8. Remove the two screws and position the side shield aside.
