F 550 2WD Super Duty V10-6.8L VIN V (2005)
Camshaft Gear/Sprocket: Specifications
CAUTION: Only use hand tools to tighten the camshaft sprocket bolt or damage may occur to the camshaft or camshaft sprocket.
RH camshaft sprocket
Tighten the bolt in 2 stages:
Stage 1: Tighten to ................................................................................................................................... 40 Nm (30 ft. lbs.) in the sequence shown.
Stage 2: Tighten an additional 90 degrees.
LH camshaft sprocket
Tighten the bolt in 2 stages:
Stage 1: Tighten to ................................................................................................................................... 40 Nm (30 ft. lbs.) in the sequence shown.
Stage 2: Tighten an additional 90 degrees.