F 550 2WD Super Duty V10-6.8L VIN V (2005)
6. CAUTION: Only use hand tools when installing the transmission mount-to-crossmember nuts or damage to the transmission mount can occur.
Tighten the transmission mount-to-crossmember nuts.
^
Tighten to 103 Nm (76 ft. lbs.).
7. Position the positive crankcase ventilation (PCV) tube and connect the quick connect coupling to the valve cover.
8. Position the engine wiring harness retainers onto the valve cover.
9. Position the evaporative emissions (EVAP) Cube and connect the quick connect couplings.
