F 550 2WD Super Duty V10-6.8L VIN V (2005)
9. Clean the O-ring seal grooves with a 300-mm (12-inch) length of natural fiber string.
-
Loop the string around the grooves and pull the string back and forth.
10. Remove any foreign material from the grooves with a lint-free cloth.
Connect
1. Install the spring lock coupling spring.
2. Lubricate the inside of the coupling with mineral oil.
3. CAUTION: Use only the new O-ring seals. The use of any O-ring seals other than those specified in the Ford Master Parts Catalog may
result in intermittent leakage during vehicle operation.
Install the O-ring seals.
-
Lubricate the O-ring seals with mineral oil.