F 550 2WD Super Duty V10-6.8L VIN V (2005)
Hose/Line HVAC: Service and Repair
Compressor Manifold and Tube Assembly
COMPRESSOR MANIFOLD AND TUBE ASSEMBLY
Removal and Installation
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning system except when there is physical evidence of
contamination from a failed A/C compressor or damage to the suction accumulator.
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Recover the refrigerant.
3. Remove the lug wrench.
Vehicles equipped with auxiliary climate control
4. Disconnect the auxiliary line fitting.
All vehicles
5. Disconnect the manifold and tube fitting at the suction accumulator.
-
Discard the O-ring seals.
6. Remove the tube clamp.