F 550 2WD Super Duty V10-6.8L VIN V (2005)
5. NOTE: Thoroughly clean all debris from the threads.
NOTE: To prevent fluid leakage be sure to insert the pressure line into the quick connect before positioning the pressure line bracket and
tightening the lower power steering pump bolt.
Disconnect the pressure line-to-pump fitting and remove the pressure line.
^
Discard the Teflon seal.
6. To install, reverse the removal procedure.
^
Using the special tool, install 2 new Teflon seals on the pressure line fittings.
^
Fill the power steering system.
