F 550 2WD Super Duty V10-6.8L VIN V (2005)
Wheel Bearing: Service and Repair
Front Suspension
Wheel Bearing and Wheel Hub - F450, F550
Removal and Installation
1. Remove the wheel and tire assembly.
2. If equipped, disconnect the wheel speed sensor electrical connector.
3. If equipped, detach the sensor harness from the brake hose.
4. If equipped, remove the wheel speed sensor bolt and position the sensor aside.
5. Remove the bolts and position the caliper, pads and anchor plate aside.
6. Remove the eight nuts, the hub extended and the brake disc.
7. If equipped, remove the wheel speed sensor harness bolt.