F 550 2WD Super Duty V10-6.8L VIN V (2005)
Fuel Line Coupler: Service and Repair
Quick Connect Coupling Retainer Clip
QUICK CONNECT COUPLING RETAINER CLIP
Removal
1. Insert the tool that is supplied with the new replacement retainer clip into the quick connect coupling body until it engages and spreads the retainer
legs.
2. Grasp the retainer clip under the lip on each side, pull outward and remove while simultaneously removing the tool from the quick connect
coupling body.
-
The legs of the retainer clip may catch on the quick connect coupling body just prior to removal and you may need to open the legs of the
retainer clip slightly to complete removal.
3. Discard the quick connect coupling retainer clip.
Installation
1. Install the tool into the quick connect coupling body.
2. Insert the legs of the new retainer clip into the windows on the body of the quick connect coupling body.
