F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
4. Disconnect the rear tail lamp electrical connector.
5. Remove the rear tail lamp wiring harness from the pickup bed.
6. NOTE: 8-foot bed shown, 6-foot bed similar.
Remove the screws.
7. Loosen the fuel filler assembly hose clamps, then position the fuel filler assembly aside.
8. Remove the pickup bed bolts.
-
To install, tighten to 63 Nm (46 lb-ft).
9. CAUTION: Handle the pickup bed carefully when removing from the vehicle to avoid damage to the cab or bed finish.
NOTE: For 6-3/4-foot and 8-foot pickup beds, 3 assistants are necessary to remove the pickup bed from the vehicle.
