F 550 2WD Super Duty V8-6.0L DSL Turbo VIN P (2006)
Fan Blade: Service and Repair
Cooling Fan - 6.0L Diesel
Cooling Fan - 6.0L Diesel
Special Tool(s)
Removal and Installation
1. Remove the radiator.
2. Disconnect the cooling fan clutch electrical connector. Unclip and position the fan wiring aside.
3. NOTE: The large clutch assembly nut has a RH thread and must be rotated counterclockwise to remove it.
NOTE:Use a hole in the fan hub to prevent the fan from turning.
Using the special tool, remove the cooling fan and clutch.
^
To install, tighten to 155 Nm (114 ft. lbs.).
4. If necessary, remove the bolts and separate the cooling fan and the clutch.
^
To install, tighten to 17 Nm (13 ft. lbs.).
