F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
3. Disconnect the trough guide rods from the lifter arm assemblies.
4. Slide the trough guide back to the slot (approximately 15 mm [0.6 in]) cut in track.
-
Carefully twist trough guide through the slot in the track to remove.
5. Inspect the trough guide assembly for damage. If damage is found, inspect the track for broken pieces and remove them.
6. To install, reverse the removal procedure.
7. Align roof opening panel. For additional information, refer to Roof Opening Panel Alignment. See: Adjustments
