ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Powertrain/Drivetrain Mount Neutralizing|Page 2467 > < Powertrain/Drivetrain Mount Neutralizing|Page 2465
Page 13
background image

^

Tighten to 90 Nm (66 lb-ft).

18. NOTE: RH side shown, LH side similar.

If equipped, install the running boards and bolts.
^

Tighten to 13 Nm (115 lb-inch).

19. Connect the retaining clip for the transmission cooler tubes at the frame.

20. Position back the ground strap and install the bolt.

^

Tighten to 25 Nm (18 lb-ft).

Powertrain/Drivetrain Mount Neutralizing|Page 2467 > < Powertrain/Drivetrain Mount Neutralizing|Page 2465