F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
23. Connect the PCM electrical connector and wire retainer.
24. NOTE: Install a new press-in-place gasket.
Install the crankcase vent oil separator and bolts.
^
Tighten to 13 Nm (115 lb-in).
25. Connect the crankcase vent oil separator drain tube.
26. With the help of an assistant, install the hood and bolts. Connect the hood lift rods.
^
Tighten to 13 Nm (115 lb-in).
