F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
5. Remove the RH turbocharger inlet pipe.
^
In order to remove the RH turbocharger inlet pipe, roll it to the left side of the vehicle and then remove the turbocharger inlet pipe.
6. Remove the cooling fan stator. For additional information, refer to Cooling System.
7. Remove the accessory drive belt.
8. If equipped, remove the A/C drive belt.
^
Remove the belt from the bottom of the A/C clutch pulley, then remove it from the crankshaft pulley.