F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
Torque Chart - LH Turbocharger Inlet Pipe-to-LH Exhaust Manifold Upper Bolt
13. Tighten the RH turbocharger inlet pipe-to-turbocharger bolts and RH turbocharger inlet pipe-to-exhaust manifold nuts.
1
Tighten the bolts to 25 Nm (18 lb-ft).
2
Tighten the nuts to 31 Nm (23 lb-ft).
14. Install the EGT sensor into the RH turbocharger inlet pipe.
^
Tighten to 44 Nm (32 lb-ft).
