ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Exhaust Pressure Sensor > < Exhaust Gas Recirculation (EGR) Oxidation Catalytic Converter (OC) and Turbocharger Inlet Pipes - Body Off|Page 3304
Page 35
background image

intermediate pipe-to-diesel particulate filter Torca(R) clamp.
^

Tighten to 55 Nm (41 lb-ft).

3. Install the tailpipe.

4. NOTE: The exhaust system alignment procedure only needs to be carried out if the exhaust system isolators are not at zero load.

Check to see if the exhaust system isolators are at zero load. If the exhaust system isolators are not at zero load, then carry out the exhaust system
alignment procedure.

Exhaust Pressure Sensor > < Exhaust Gas Recirculation (EGR) Oxidation Catalytic Converter (OC) and Turbocharger Inlet Pipes - Body Off|Page 3304